 |
RESIDENTIAL ENERGY SAVER GAS
-
1" Non-CFC foam insulation (except where noted).
-
Vitraglas® lining.
-
Factory installed dielectric waterway fittings.
-
Protective magnesium anode rod.
-
Factory installed Hydrojet® Total Performance System.
-
Fully automatic control.
-
T&P relief valve opening on side of tank. Some models feature an optional
top opening.
-
Slider Combustion Chamber Door.
-
Brass Drain Valve.
-
Natural gas models offered with Lo-Nox burners as standard equipment.
|
|
 |
RESIDENTIAL ENERGY SAVER M4 MODELS
-
Natural gas models offered with Lo-Nox burners as standard equipment.
-
LP gas models use cast iron burners.
-
Low consumption pilot - 400 BTU input.
-
2" Non-CFC foam insulation. No added insulation blanket required.
-
Factory installed dielectric waterway fittings.
-
Heavy gauge steel tank with Vitraglas® lining.
-
Protective magnesium anode rod.
-
Side opening for T&P relief valve. Some models feature an optional
top opening.
-
Factory installed Hydrojet®
Total Performance System.
-
Slider Combustion Chamber Door.
-
Brass Drain Valve.
|
|
 |
TTW1® RESIDENTIAL THROUGH-THE-WALL
GAS
-
1" Non-CFC foam insulation.
-
Intermittent Pilot Ignition System - no standing pilot.
-
Can be vented both horizontally and vertically.
-
May be installed up to 26' from outside wall with 2" PVC vent pipe and
1 elbow.
-
May be installed up to 95' from outside wall with 3" PVC vent pipe and
1 elbow.
-
Agency approved for use with schedule 40 ABS, schedule 40 PVC and schedule
40 CPVC.
-
Power vented for positive exhaust.
-
Vitraglas® lining.
-
Protective magnesium anode rod.
-
Factory installed dielectric waterway fittings.
-
Factory installed Hydrojet®
Total Performance System.
-
Fully automatic controls.
-
T&P relief valve opening on side of tank.
-
Slider Combustion Chamber Door.
-
Brass Drain Valve.
|
|
 |
TTW2® RESIDENTIAL THROUGH-THE-WALL
GAS
-
Side connections for space heating.
-
Can be vented both horizontally and vertically.
-
May be installed up to 70' from outside wall, with 4" PVC vent pipe and
1 elbow.
-
Agency approved for use with schedule 40 ABS, schedule 40 PVC and schedule
40 CPVC.
-
May be installed up to 30' from outside wall, with 3" PVC vent pipe and
1 elbow.
-
Power vented for positive exhaust.
-
Vitraglas® lining.
-
Protective magnesium anode rod.
-
Factory installed Hydrojet®
Total Performance System.
-
Factory installed dielectric waterway fittings.
-
2" Non-CFC foam insulation.
-
Smart Valve control.
-
T&P relief valve opening on side of tank.
-
Slider Combustion Chamber Door.
-
Brass Drain Valve.
|
|
 |
COMBICOR® WATER HEATING PRODUCTS
Standard Features on All Models
-
Vitraglas® lining.
-
Factory installed dielectric waterway fittings.
-
Protective magnesium anode rod.
-
Heat exchanger - UltraCoil® Heat Transfer System.
-
T&P relief valve installed.
-
Anti-scald device supplied with unit.
-
Brass Drain Valve.
CombiCor® TTW Gas Model Features
-
Power Vented for positive exhaust during main burner operation.
-
Cast Iron Burner for all gas types. Except 50 gallon model uses new Lo-Nox
burner for natural gas.
-
2" Non-CFC foam insulation
-
10-Year limited warranty on tank and heat exchanger.
CombiCor® Gas Model Features
-
Factory installed Hydrojet®
Total Performance System.
-
Cast Iron Burner for all gas types. Except 50 gallon model uses new Lo-Nox
burner for natural gas.
-
2" Non-CFC foam insulation.
-
10-Year limited warranty on tank and heat exchanger.
CombiCor® Oil-Powered Model Features
-
Factory installed Hydrojet®
Total Performance System.
-
Beckett AF Burner. Single stage and two stage available. (Must be ordered
with heater, not included in heater carton.)
-
1" Non-CFC foam insulation.
-
6-Year limited warranty on tank and heat exchanger.
|
|
 |
POWERCOR® WATER HEATING PRODUCTS
M2 Models Feature
-
2" Non-CFC foam insulation.
-
UltraCoil® Heat exchanger -
-
Heat Transfer System.
-
Stand-by heat loss is less than 1/2 degree per hour.
-
Vitraglas® lining.
-
Factory installed dielectric waterway fittings.
-
Protective magnesium anode rod.
-
Factory installed Hydrojet®
Total Performance System.
-
T&P relief valve opening on top of unit.
-
10 Year limited warranty on tank and heat exchanger.
-
Brass Drain Valve.
|
|
 |
COMMERCIAL GAS LIGHT DUTY ENERGY SAVERS
-
Vitraglas lined tank
-
Non CFC foam insulation
-
Protective magnesium anode rod
-
Side connections for space heating
-
Meets ASHRAE 90.1b 1992 energy efficiency standards
-
Brass Drain Valve.
|
|